What squawk 7600 means
7600 is the transponder code for a communications failure: the aircraft cannot talk to air traffic control, or cannot hear it. It is a planned-for situation with procedures both pilots and controllers know, and it almost always ends in a normal landing.
Practise at MadridWhat “squawk 7600” means
When the radio fails, the crew selects 7600. Radar still sees the aircraft and flags the alert, so the controller knows not to expect replies or readbacks. It is often called NORDO (no radio). The failure is often partial: the aircraft may be able to receive but not transmit, or the other way round.
What the pilot does
First, try to restore contact: check headsets and selectors, try another frequency or the 121.5 MHz emergency frequency, or ask another aircraft to relay. If that fails, follow a procedure set in advance. In visual conditions, stay visual and land at the nearest suitable airport. In instrument conditions, keep the last assigned level and speed for a set period, then follow the flight plan to the destination and start the approach at the expected time.
What air traffic control does
Because the controller knows what the aircraft will do, they clear other traffic from its expected route and level. They keep transmitting in case it can still receive, asking it to acknowledge with a code change or a turn. They warn the next units and the destination airport so the runway is clear when it arrives.
Light signals from the tower
If the aircraft arrives without radio, the tower can use a signal light gun. The signals are standardised by ICAO and pilots learn them in training.
| Signal | Meaning | What the pilot does |
|---|---|---|
| Steady green | Cleared to land | Completes the approach and lands |
| Flashing green | Return for landing | Rejoins the circuit and waits for steady green |
| Steady red | Give way | Continues circling without landing |
| Flashing red | Airport unsafe | Does not land at this airport |
7600 vs 7700 and 7500
7600 on its own is not an emergency: the aircraft may be flying perfectly well with only its radio lost. If something else goes wrong, the crew can switch to 7700. 7500 is different: it signals unlawful interference, such as a hijacking.
A no-radio aircraft in ATC7700
A 7600 aircraft can appear during a shift. For a few minutes it ignores your instructions and changes heading on its own, so your job is to keep everyone else out of its way. When it answers again, the game tells you and it follows instructions once more. This is a simplification: a real no-radio aircraft follows predictable procedures.
Frequently asked questions
What does squawk 7600 mean?
It signals a radio communication failure. The aircraft cannot talk to air traffic control, or cannot hear it.
Is squawk 7600 serious?
Usually not. The aircraft may have no other problem. Pilots and controllers have procedures for it and most cases end in a normal landing.
How does a plane land without radio?
It follows a pre-set procedure, and near the airport the tower can clear it with light signals: steady green means cleared to land.
What is the difference between 7600 and 7700?
7600 is radio failure; 7700 is a general emergency. A no-radio aircraft with another problem can select 7700.
Source for the real-world code: FAA AIM 6-2, Emergency Services Available to Pilots · FAA AIM 4-1-20, Transponder Operation.